Manage Network Patch Installations with CPI's 'CCS Combination Cabling Section'
CHATSWORTH, CA - Chatsworth Products, Inc. (CPI), a 100% employee-owned leading manufacturer of structural support systems for technology equipment, announces the availability of the new CCS Combination Cabling Section, an innovative new product that cultivates the best of the company's popular Vertical Cabling Sections.
Incorporating the plastic cable guides used on CPI's MCS Master Cabling Section on the front, the rear retains the classic Vertical Cabling Section (VCS) design. This means that bundles of cable can be easily routed into the open Cabling Section on the rear and into the back of patch panels.
The front of the Cabling Section provides fanning and managing of patch cords through the use of 1 RMU spaced cable guides. As an added feature, the depth of the CCS Combination Cabling Section has been specifically designed to minimize offset from the rack channel edges so that cables gently transition into the Cabling Section without sharp turns, bends or kinks; maintaining high performance copper and fiber optic cable bend radii. Design includes a Switch/Gate Door Cover (front) that can be easily configured for right or left opening (or removed) and edge-protected pass through ports for routing cable from front to back. Available in 6', 7', 7'6", 8' and 9' heights in 3.65", 6" and 10" widths with two styles-for 3"D rack channel or 6"D rack channel. The Cabling Sections and SwitchGate Cover/Door feature a black powder coat textured finish to minimize fingerprints and smudges.
.jpg)
|
| The new CCS Combination Cabling Section from CPI combines the best of the company's popular Vertical Cabling Sections by offering plastic cable guides to easily route cables into the open Cabling Section on the rear and then into the back of patch panels. An added feature is that the depth of the CCS Combination Cabling Section was specifically designed to minimize offset from the rack channel edges so that cables gently transition into the Cabling Section without sharp turns, bends or kinks; maintaining high performance copper and fiber optic cable bend radii. |
At Chatsworth Products (CPI), it is our mission to address today’s critical IT infrastructure needs with products and services that protect your ever-growing investment in information and communication technology. We act as your business partner and are uniquely prepared to respond to your specific requirements with global availability and rapid product customization that will give you a competitive advantage. At CPI, our passion works for you. With over two decades of engineering innovative IT physical layer solutions for the Fortune 500 and multinational corporations, CPI can respond to your business requirements with unequaled application expertise, customer service and technical support, as well as a global network of industry-leading distributors. Headquartered in the United States, CPI operates from multiple sites worldwide, including offices in Mexico, Canada, China, the United Arab Emirates and the United Kingdom. CPI’s manufacturing facilities are located in the United States, Asia and Europe.
CPI is listed with the General Services Administration (GSA) under Federal Supply Schedule IT 70. Products are also available through GSA Advantage and through Government Wide Acquisition Contracts (GWACs), including GSA Connections and NITAAC-ECS III (www.chatsworth.com/gov).
|
www.chatsworth.com
[email protected]
800-834-4969
|
Raissa Carey
Public Relations
[email protected]
512-591-9525
|
©2019 Chatsworth Products, Inc. All rights reserved. Chatsworth Products, Clik-Nut, CPI, Motive, CPI Passive Cooling, Secure Array, eConnect, Evolution, GlobalFrame, MegaFrame, OnTrac, QuadraRack, RMR, Saf-T-Grip, SeismicFrame, SlimFrame, TeraFrame and Velocity are federally registered trademarks of Chatsworth Products. EuroFrame, CUBE-iT and Simply Efficient are trademarks of Chatsworth Products. All other trademarks belong to their respective companies. |