CPI's TeraFrame™ Cabinet System
Infinite Configurability Without Infinite Waiting

WESTLAKE VILLAGE, Calif. - January 2006 - Chatsworth Products, Inc. (CPI), a leading manufacturer of systems
designed to organize, store and secure IT infrastructure equipment adds the TeraFrame™ Cabinet System to its
product offering.

To seal cable openings in access floors use the KoldLok® Raised Floor Grommet. This double-layer closure
seals around cables to prevent the escape of cold air, thereby reducing cooling costs and increasing cooling
performance. The KoldLok Raised Floor Grommet is easy to install over existing holes without re-cabling and
permits large cable bundles and power connectors to pass through openings.

Move hot exhaust air from the rear of the cabinet to a drop ceiling plenum or high point in the room with CPI's
patent pending Vertical Exhaust Duct System. This system attaches to the top of 1200 mm deep TeraFrame
Cabinets and should be used with a perforated front door, solid rear door and solid side panels. CPI's patent
pending Airflow Director is included and mounts at the bottom of the cabinet to direct hot exhaust air into the
space between the back of equipment and the rear door.

CPI's patent pending Internal Air Duct channels cold air from the access floor plenum to the top half of the
TeraFrame, reducing hot spots in high heat density applications. Adjustable doors allow users to manipulate and
direct cold air to the front of equipment

The TeraFrame Cabinet System offers cable management to keep network and power cables separate, control
power cord slack and support multiple power strips or PDUs for full power redundancy, while still allowing critical
one-way airflow throughout the cabinet space. Designed for fiber, Cat 6a UTP and all other media, the TeraFrame
Cabinet makes it easy to trace cables during moves, adds or changes.

Choose CPI's Vertical Cable Manager to guide cables into each rack-mount space using T-shaped cable
fingers. Attach to equipment-mounting rails and adjust along cabinet sides. Create a front-to-back pathway
between two Vertical Cable Managers by adding Front-to-Back Cable Managers.

The Rack-Mount Cable Shelf used in conjunction with an Air Dam or Internal Air Duct creates a front-to-back
pathway for cables without compromising critical one-way airflow through cabinet space. The shelf offers brush
openings for cables along the front panel to prevent the loss of cold air and provide slack management for fiber
patch cords.

Support multiple strips/PDUs and create a separate pathway specifically for power strips and power cables along
the side of the TeraFrame Cabinet using CPI's Vertical Power Manager. This power manager attaches to the
cabinet frame and adjusts in depth to match equipment requirements.

From the welded steel construction down to the door hinges, TeraFrame adds to the strength, support and security
of IT equipment and cabling. Precisely designed latches provide multiple security and key management options.
All TeraFrame door options have hidden hinges that cannot be tampered with and the captive hinges eliminate
loose parts. Swing handles cannot be operated in the locked position and locking recessed spring-loaded latches
secure side panels onto the cabinets frame.

Monitor environmental security and network equipment conditions with the patent pending technology found in CPI's Remote Infrastructure Management (RIM-600) system. Internal and external sensors provide remote monitoring, logging and reporting of temperature, humidity, water, power outages, smoke detection, sound, motion, intrusion, and streaming images from network cameras, with several customer configurable notification options. With the capacity to connect up to 31 nodes to each host, monitor up to 256 environmental sensors, 2,048 IP addresses and port anywhere in the customers network, the RIM-600 presents an abundance of capacity and function without a large investment in host and node equipment.

To personalize the TeraFrame Cabinet System and receive a BOM, rendered drawings and selection of global
distributors use CPI's Product Configurator at www.chatsworth.com/configurator. For additional information about
the TeraFrame Cabinet System or other CPI products visit www.chatsworth.com.

*TeraFrame orders shipping within the 48 contiguous states and District of Columbia may have a shorter delivery time when selected from the standard part matrix.  All products quoted are subject to availability based on manufacturing capacity and shipping dates should be considered estimates only.  For large order volumes requiring logistics coordination, Chatsworth Products, Inc. (CPI) reserves the right to negotiate scheduled shipment quantities and intervals.  

While every effort has been made to ensure the accuracy of all information, CPI does not accept liability for any errors or omissions and reserves the right to change information and descriptions of listed services and products.